Wheels for Eichhorn Constructor / HEROS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wheels for tractors / monster trucks. TPU, all-same-filament and multimaterial versions.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
The original ones are too small to build tractors and monster trucks, according to my kid, so here you go.
These alternative wheels work with the original wooden hubs, but I'm providing printable ones as well.
Tires are designed to be easily printed with flex filament, e.g. TPU. No supports required. Mine were printed with TPU 80A and came out nice and bouncy, with good tight fit on the hubs. They are directional, so make sure you print 2 left and 2 right tires.
Other files:
fitting_test_flex: Low-filament consumption test piece to try out the fit on the hub. If the hubs turn inside the tires, you can scale them up by 1-2%. Don't scale them down, the grey plastic bearings won't fit.
wheel_small_left, wheel_small_right, wheel_big_left, wheel_big_right: Complete single-piece wheels with no internal cavities. If you can't print flex materials you can use these, but be aware that they are quite substantial (in case they get thrown).
hub_multimaterial: Simplified hub for true multimaterial printing (use interlocking feature in slicer).
tire_small_left_multimaterial, tire_small_right_multimaterial, tire_big_left_multimaterial, tire_big_right_multimaterial: Simplified tires for true multimaterial printing (use interlocking feature in slicer).