LIFTR
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact, 3D-printable scissor lift with a vertically moving platform and mechanical linkage.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 5
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
LIFTR is a miniature scissor lift designed in Fusion 360 to explore how mechanical linkages can convert simple movement into vertical lifting motion. It uses connected arms, pivot joints and a sliding mechanism to raise and lower the top platform. For printing, PLA with a 0.16–0.2 mm layer height and 20% infill is a good starting point. Print the arms and base flat, use supports only where necessary, and make sure the pin holes and sliding areas are clean. Assemble the arms using the pins and connect them to the base and top platform with the appropriate joints. Check that everything moves freely before operating the lift. You may need to adjust clearances slightly depending on your printer. Hope you enjoy building LIFTR!