Kirimas Travel Chess: One-Plate Folding Chess Set with Print-in-Place Hinge and Pegged Pieces
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A whole travel chess set in one 4-colour print: the hinged case is the board and all 32 pegged pieces store inside.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
One plate, four colours, nothing to assemble: a complete travel chess set. A folding case with a print-in-place hinge prints next to both sets of pieces. The outside of the case is the board, every piece has a peg so nothing slides off on a train, a plane or a camping table, and all 32 pieces travel inside the closed case.
HOW IT WORKS
Unfold: open the case flat and turn it over. The outside of the two halves is the board; it stands level on its hinge barrels and four feet.
Play: every square has a peg hole and every piece has a ribbed peg, so pieces stay where you put them.
Pack: the pieces plug into the same holes from the inside. White goes on ranks 3-4 of the White half (the one with KIRIMAS inside), Black on its starting squares. When the case folds, each set sits opposite the empty rows of the other half, which is why 23 mm pieces fit in a 29 mm case. A gold map inside shows where each piece goes.
Close: fold the halves together. The four feet click into slots on the opposite rim.
COLOUR DOES THE WORK
White and green squares, the tournament colours, with a1 dark as the rules require
Gold coordinates a-h and 1-8 on all four sides, the right way up for both players
Gold cross on the kings and gold ring on the queens, so the key pieces stand out
Gold storage map and KIRIMAS logo inside the case
All the colour is in the first five layers of the board and the first three layers of each piece
PRINT SETTINGS
The 3MF is ready to print: 0.2 mm layers (first layer 0.2 mm), 0.4 mm nozzle, 3 walls, 15% gyroid infill, no supports, elephant-foot compensation 0.15 mm
AMS slots: 1 white, 2 black, 3 green, 4 gold (already assigned). Flush into objects' infill is on to cut purge
Plate 1: the whole set on one 256 x 256 mm plate. The box-board has no brim (a brim would weld the hinge seam); the pieces have a 3 mm outer brim because they stand on their small flat tops. Prime tower in the empty top-right corner
Plate 2: the 30-minute fit test (hinge slice, 4.4 / 4.5 / 4.6 mm peg holes and two pegs). Print it first. If a peg is too tight in the 4.5 mm hole (2 dots), scale the pieces to 98%; too loose, 101%
Pieces print upside down (flat top on the bed, peg last), so nothing needs support. Replacement single-colour piece STLs are included
Rough estimate: about 140 g plus purge, about 140 colour changes, roughly 7-9 hours on an A1 with AMS lite
AFTER PRINTING
Let the plate cool completely, then lift the case off in one piece.
Fold the White half up and over slowly two or three times to free the hinge.
Peel the brims off the pieces.
Push each piece into a hole once to seat its peg ribs.
SIZES
Board: 8 x 8 squares of 22 mm with a 6 mm border, 188 x 188 mm open
Closed case: 188 x 97 x 29 mm
Pieces: king 23 mm, queen 21, bishop 18.5, knight 17, rook 14.5, pawn 12.5 mm tall, plus a 2.6 mm peg
Original design by Kirimas Studio. The piece shapes are Kirimas Studio's own modern profiles.