M VAVE FM-1 knobs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A couple of different sizes of printed knobs for the M Vave FM-1 synth.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
A couple of different sized, tested knobs for the slightly fatter fingered amongst us, to fit the knurled encoders on the M Vave FM-1. I've also included versions that fit the Master.
I tried a couple but they were either modelled with features to engage the splines on the stock knobs that were so small they got lost in slicing, or walls so thin in places they wouldn't slice at all.
My printer is well set up and these do rely on accuracy to get a nice fit, but they are designed in a way that makes it easy to scale them up and down in your slicer to get them snug without risking damaging your little pocket music maker by having to hammer them into place.
0.2mm layers work fine, with a 0.4mm nozzle.
I've included the STEP files so you can 'borrow' the internal geometry and come up with your own versions.