102mm Telescope Light Shield with vent
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sky-Watcher Skymax 102 mm Maksutov-Cassegrain Light Shield with vents: simply print, paint, and assemble with glue!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 4
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I love my small scope but wanted the most contrast possible in my area, so I created an over-the-top light shield for my Sky-Watcher Skymax 102 mm Maksutov-Cassegrain. Print the vent strips and resize them to fit better; the spring doesn’t have a specific slot but should be placed at the base near the scope. Test fit the strips, glue them together, and then print the shield pieces. I painted them with flat black spray paint and added Black 4.0. Attach the vent strips, glue the halves together, and finally, glue the three larger parts together.
.4 mm nozzle
.2 mm layer height
I printed them on their sides, as that orientation proved most suitable during my testing.