1 / 3
Badminton string spool holder — zdjęcie 1
1 / 3

Badminton string spool holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Badminton string spool holder

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
12
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Indoor Sports
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Badminton string spool holder.

The "pole" in the holder consists of an inner and an outer part. The inner part can lock into the other holder by inserting and twisting. The locking washers can be used to control where the rolls are on the holder. The spools spin easily and the holder makes for easier and neater stringing.

I printed all parts in ABS, except the locking washers. The locking washers were printed in TPU to assure that they were snug on the pole, whilst being able to slide. My printer was able to print the holders horisontally, even though there is a horisontal overhang.

I would recommend an infill which is greater than 20%. Mine was printed with 15% infill and is a bit unstable.

Tagi