Quecoo T85 Replacement Shell
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modified TS100 shell compatible with Quecoo T85 soldering iron.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 4
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created replacement shell for my Quecoo soldering iron based on TS100 shell. The main difference is buttons, display position and front side of the shell with nut-based tip fixing and LED. To install with LED you should desolder it from the main board and use wires so it could be placed in its hole before board installation.
To install the board, at first you need to put on the button caps, then insert 5525 port into its place, and finally slide the board into its place. After that just close the shell with bottom part and secure it with middle screw approx M2x16. There is also screw hole for grounding M2.5 screw.
Printed with PETG. Supports only for bottom part.