1 / 1
Scepter Military Fuel Can Seal and Spacer — zdjęcie 1

Scepter Military Fuel Can Seal and Spacer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A seal and spacer designed for the lid/cap of a Scepter 20L fuel can.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
11
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Most of the spacers/gaskets in the old Scepter jerry cans are cracked, rotted, or plain missing. 

Print the gasket out of a decent TPU (most TPU formulations are gas-resistant to a certain extent). I used 8 walls 99% infill on accident and it seems solid enough to last.

The spacer should be made out of PLA/PETG or other gasoline resistant plastics - note PLA will still deform under moderate summer temperatures depending on your area. I printed mine in HTPLA Pro and had to do some filing to fit my cap.

***Measure your cap and do test fits before really putting your prints into the cap!!! You can't find replacements easily and the caps are practically blind holes! The provided files should be pretty close but measuring/sanding will likely be necessary.***

Made in Freecad.

Tagi