Harbour VTS Control Tower 1:200 with Hand-Turned Radar (free sample)

Free 1:200 sample of our generic harbour vessel traffic services (VTS) control tower: a tapered round shaft with slit windows, a gallery with a rail, a 12-sided glazed watch room, a roof with a mast and a radar scanner that you turn by hand through 360 degrees on a printed pin, on a small quay base with an entrance annex. This download is the 1:200 STL set only: 80 x 80 mm base, 174 mm high, 11 STL files (quay base, annex, two hollow shaft sections, gallery and watch room, roof, radar pedestal, scanner, mast, fit test coupon and cap; print the coupon first). No supports (the round parts are hollow cups that stack with a V-groove ring), about 71 g. Slice-checked in PrusaSlicer (0.4 mm nozzle, 0.2 mm layers, PETG) and the scanner is swept in CAD with no collisions (0.35 mm running clearance), but this exact version has not been test-printed yet. Honest compromises: the watch room has open windows (no glass parts), one rail line only, no stairs. Glue the tower, never the scanner. The full version has the 1:87 and 1:160 sets as well and the multicolour 3MF, with all the render pictures, on Cults: https://cults3d.com/en/3d-model/game/harbour-vts-control-tower-scale-model-with-hand-turned-radar-1-87-1-160-1-20