Spoon Rest with Handle Cradle & Drip Channel – Spoon and Ladle Sizes, No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spoon/ladle rest: round tray, drip channel and U-cradle for the handle. Two sizes, prints flat without supports.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Standard Digital File License
Where do you put the stirring spoon while the sauce is simmering? On this rest: the head lies in a round tray, the handle sits in a U-cradle at the end – and whatever drips down the handle runs back through the channel into the tray, not onto the counter.
Tray + channel + cradle: round tray with a 2 mm floor and smooth inner fillets (easy to wipe), a channel along the neck that carries drips back into the tray, and a raised cradle with a U-notch that keeps the handle from rolling.
Two sizes: S for spoons, spatulas and wooden spoons (tray Ø72 inside, notch 20 mm, 136 mm long), L for ladles (tray Ø94 inside, notch 24 mm, 165 mm long).
Balanced: the cradle is far enough from the tray that a typical 30 cm cooking spoon rests with its centre of gravity between the supports.
Prints without supports: flat bottom on the bed, all walls vertical, the notch has a round bottom – nothing overhangs.
Solid body, no lattice, no thin parts – easy to rinse and wipe (hand wash recommended).
Print settings
Orientation: flat bottom on the bed, as in the 3MF / STL.
0.20 mm layer, PETG recommended near the stove (PLA works for room-temperature use), 2 walls, 15% infill, no supports.
Bambu Lab A1, PLA, 0.20 mm: S (spoon) – 53 min / 24.9 g, L (ladle) – 1 h 09 min / 36.5 g.
Keep it away from the hob itself – plastic is not for direct contact with hot pans.
Designed from scratch by bezbajzlu.