1 / 3
Jigglypuff Christmas Keychain - 2 Colours, No AMS — zdjęcie 1
1 / 3

Jigglypuff Christmas Keychain - 2 Colours, No AMS

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Flat two-colour Jigglypuff Christmas keychain with Santa hat and bell. No AMS: filament swap at layer 11.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
5
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Christmas Jigglypuff keychain, wearing a Santa hat with a star, holding a bell ornament. Flat two-colour design: the light areas are raised 2 mm over a 2 mm dark base, so the outlines and line details show in the base colour, with a ring hole at the top for a keyring. It also works as a Christmas tree ornament or gift tag.

FILES

- jigglypuff_christmas.stl: the model.

PRINT SETTINGS

- Print flat, no supports. PLA, 0.20 mm layers. 3 walls and 100% infill make it sturdy for a keychain.

- Size: about 62 x 70 x 4 mm (2 mm base + 2 mm relief).

- Colours: one filament, no AMS or multi-material unit needed. Print the base in a dark colour and change to a light colour at the start of layer 11 (Z 2.2 mm), so the raised areas come out in the second colour and the outlines stay dark. The real print photos show black base + white relief. Add the pause or filament change at that height in your slicer.

- About 25-30 min and 9-12 g of PLA, depending on your printer and settings.

- The cover is a presentation image; the other photos show real prints made on my Ender 3 V3 KE.

Unofficial fan art made by a fan, for personal use. It is not an official product and is not affiliated with or endorsed by Nintendo, Game Freak, Creatures or The Pokémon Company. No official logos are included.

If you like it, a like helps a lot!

Original design by dj_bel. Not AI-generated.

Tagi