1 / 1
Shako Insert — zdjęcie 1

Shako Insert

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Marching Band Shako Insert

Ocena
0 / 5
Polubienia
1
Pobrania
27
Wydruki
0
Wyświetlenia
188
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Hello!

I'm a band director, and my band uses shakos that have a plastic insert to hold our plumes in place. Often the little brass nut comes loose and the insert is removed with the shako. We have not lost many of these pieces, BUT, having several spares in my "Go-Bag" would be useful so I modeled up a replacement and tested it. 

Print instructions:
-Both files work, but version 3 has a thicker tab on the bottom.
-I printed with 8 perimeters, and it's very robust.
-PLA has been working well, but I'm sure other materials with some more flex would be fine.
-Print with the largest face on the build plate and the tab facing up. No need for supports.

Our shakos only use the lowest hole, but if there is demand, I can add the other holes, too.

Tagi