HaRVy DrawPlates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Draw-plates used to attach various accessories to HaRVy
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
These are draw-plates, specifically for attaching accessories to HaRVy. The idea is that these have elongated through-holes, but when you tighten the screws, the counterink bores will draw the two pieces together.
There are a variety of these designed for different screw types and target gaps. Note that American an ISO screws have different countersink angles, so it is important to select the model that matches the screw type you are using.
A 3.5mm drawplate will create a targeted 3.5mm gap between HaRVy and the accessory (which is useful for say, a 4mm gasket, to ensure proper compression). A 0mm drawplate will target no gap. Note that for HaRVy, if you use a 0mm draw plate, you still need to use caulking as you will not get a proper seal otherwise.
If you need a size that is not posted, let me know. I have this automated so it's easy to customize.