MayAudio Duke
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIY Hifi Closed-back Headphone using high quality 50mm drivers. Designed in Finland. Made for pure sound quality.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hifi Closed-back Headphone using 52mm drivers.
The sound is v-shaped, sharp, detailed and punchy. Isolation is very good.
Made to work with any headband, headphone diameter is 86mm.
Part | Link |
|---|---|
3D printable headband | |
Yokes for the 3D printable headband (Satyr 2 Yoke Left + Right in the NEW one) | |
Earpads | |
Driver (buy two) | |
Heat inserts | |
Micropore tape | |
Sockets | |
Internal wires | |
M3 screw set (you need 3 6mm screws, 4 10mm screws and 2 12mm screws + 4 10mm screws for the headband) | |
PLA Filament (use any decent PLA) | |
Cable (2x3.5mm) |
Assembly instructions: https://github.com/Maja5Dev/MayAudio-Duke/blob/main/Assembly%20instructions.md
Designed in Finland.
Join our discord server: https://discord.gg/FM5Sw2YNhX
Support us on kofi: https://ko-fi.com/maya224696