1 / 11
Mansions of Madness: Organizer (All expansion / RU) part 2 — zdjęcie 1
1 / 11

Mansions of Madness: Organizer (All expansion / RU) part 2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Organizer for remaining components

Ocena
0 / 5
Polubienia
16
Pobrania
45
Wydruki
0
Wyświetlenia
1199
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Organizer for remaining components.

**Warning**: Compare your box size with the one below before printing. Also in the organizer you will need to glue the printed parts a LOT (for PLA plastic, you can use cyanoacrylate glue.

The internal dimensions of my box are 288 x 288 x 68 mm. Check the inside dimensions of your box before printing and compare with those previously indicated. If your box sizes are different, you can order your own custom box sizes from your local stores as an option.

 

Tagi