1 / 8
Laboratory power supply unit based on ZK-5KX module — zdjęcie 1
1 / 8

Laboratory power supply unit based on ZK-5KX module

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Enclosure for power supply module ZK-5KX or ZK-4KX

Ocena
0 / 5
Polubienia
2
Pobrania
2
Wydruki
0
Wyświetlenia
20
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
GNU General Public License v2.0

Thanks to the autor of origin, his model has inspired me to create my own variation. I made with ABS+ plastic. Unfortunatelly my printer doesnot support necessery temperature for this type of plastic therefore the model became warped at the corner. Regardless of this, I decided to leave it as is. In my model, I used M3 heat-set inserts for case plate and C14 plug. For backside fan I used standart fan-screws.

Tagi