1 / 2
Corner bumbers for LePetitPorteur Front Rack — zdjęcie 1
1 / 2

Corner bumbers for LePetitPorteur Front Rack

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Protection for LePetitPorteur Front rack corners

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
5
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

When we move our the family longtail bike (LePetitPorteur Longtail) from home to the street (and vice versa), we bump everywhere (the bike is stored in our flat). So limit the bike scratching, i designed some corner bumpers for the Front Rack (this model). I'll try to do the same for the rear safety bar/cage in the futur)

Printed in PLA with 0.1mm Layer Height, 4 perimeters, 20% gyroïde infill and supports
(on a Raise 3D pro 2 plus)

Check the screenshot from the slicer for the print orientation (maybe not the best one)

The printed part is just clipped to the rack. 

Tagi