Split NightOwl Top Panel (Filamentalist) and Bottom Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Split Nightowl panels. The largest piece is 115 × 115 mm.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
NightOwl Top Panel (Filamentalist) and Bottom Plate split into 4 pieces each so they fit small beds. The largest piece is 115 × 115 mm, so any bed of 120 × 120 or larger works.
All the original holes and pockets are unchanged. Assembled, each panel is the original 200 × 200 × 5 mm.
Joint
The seams are shiplap, so they don’t go straight through.
Alternating dovetail ears lock each pair of pieces together.
With the screw version, M2 countersunk screws go in from the top into captive nuts underneath.
Two versions
Standard: 16 × M2x5 countersunk screws and 16 × M2 nuts per panel (I know it's a bit overbuilt). M2x6 might stick out a bit, but it shouldn't effect functionality, as stick-out will be at the bottom of both panels.
NoScrews: same laps and ears, no screw or nut holes. Glue the pieces together.
Printing
The STLs are already in print orientation: BL and TR bottom face down, TL and BR top face down.
The edges on the bed side have 0.4 mm chamfers against elephant foot.
The nut traps print as bridges. In Orca, “Counterbore hole bridging: Sacrificial layer” helps.
STEP files are included for remixing.