Flexi Libra Keychain | Zodiac Sign | Print in Place
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wiggly print-in-place Libra scales keychain: a balance beam that tips with two swinging pans.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 5
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Standard Digital File License
Libra (♎), the Scales (23 September to 22 October), is one of our twelve Western zodiac flexi keychains and part of the second batch to go live.
It prints in one go: no supports, no assembly, no glue. Four parts, three joints: a handle with the ♎ glyph and the key-ring loop on top, a balance beam that tips from its pivot, and two hanging pans that each swing on their own.
Size: 47 x 65 x 6 mm.
Test-printed on our Creality SPARKX i7: that's the print in every photo and video. A ready-made Creality Print project for the i7 is included next to the STL, plus an Anycubic Kobra X project set up the same way (not test-printed on the Kobra X yet).
Print settings:
PLA or PETG, 0.4 mm nozzle, 0.2 mm layers
No supports, no brim
Keep elephant-foot compensation on (about 0.1-0.15 mm) so the joints don't fuse to each other
After printing, flex each joint gently once to free it
Which material: PLA is fine for a keychain that mostly stays indoors. If it lives in your pocket or rides in a hot car, use PETG (PLA starts to soften around 55-60 °C).
The other six signs are already off the printer. Follow Two Paws Workshop so you don't miss them.
Designed by us with AI help (the shapes are written as OpenSCAD code), then printed and tested for real: every photo and video here is the actual print.
Two Paws Workshop: two of us at the bench, making things that move.