1 / 4
Flexi Capricorn Keychain | Zodiac Sign | Print in Place — zdjęcie 1
1 / 4

Flexi Capricorn Keychain | Zodiac Sign | Print in Place

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A wiggly print-in-place Capricorn sea-goat keychain with a big ridged horn and a swishing three-part fish tail.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
12
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

Capricorn season starts on 22 December, so here's the Sea-Goat (♑), one of our twelve Western zodiac flexi keychains and part of the second batch to go live.

It prints in one go: no supports, no assembly, no glue. Four parts, three joints: the goat's front half with its big ridged horn, the ♑ glyph on its chest and the key-ring loop at the nape, then a fish tail in three segments that ends in a forked fin.

Size: 106 x 66 x 6 mm.

Test-printed on our Creality SPARKX i7: that's the print in every photo and video. A ready-made Creality Print project for the i7 is included next to the STL, plus an Anycubic Kobra X project set up the same way (not test-printed on the Kobra X yet).

Print settings:

  • PLA or PETG, 0.4 mm nozzle, 0.2 mm layers

  • No supports, no brim

  • Keep elephant-foot compensation on (about 0.1-0.15 mm) so the joints don't fuse to each other

  • After printing, flex each joint gently once to free it

Which material: PLA is fine for a keychain that mostly stays indoors. If it lives in your pocket or rides in a hot car, use PETG (PLA starts to soften around 55-60 °C).

The other six signs are already off the printer. Follow Two Paws Workshop so you don't miss them.

Designed by us with AI help (the shapes are written as OpenSCAD code), then printed and tested for real: every photo and video here is the actual print.

Two Paws Workshop: two of us at the bench, making things that move.

Tagi