Belt Hanger - Hang Belts by the Buckle, Resizable for 1-4 Belts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hangs each belt by its buckle, with bars below for spare straps. Pick 1 to 4 belts in the Layout Tool. No CAD.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hang each belt by its buckle, and park the spares underneath.
Most 3D print files come in one size. Mine don't.
Everyone's belts and wall space are different, so a one-size hanger is a gamble. This one comes with my Layout Tool: pick how many belts (1 to 4), the space between them, and how many spare-strap spots, and it builds an STL that fits YOUR wall. No CAD and no installs, and it works offline in your browser.
Don't want to size it? Three ready-to-print hangers are included: 2, 3 and 4 belts.
Why I made it
I needed a place to hang my belts all in one spot, where I could see all my options at a glance.
What it is
A flat plate for your wall. Each belt hangs straight down by its buckle, which slips over a leaning blade on the top rail. Under the blades are bars that hold spare straps, like other colors you swap in. Each bar holds one strap up to 35 mm wide.
Real print, on my wall
The photos show a printed hanger on my wall holding my own belts.
How it works
- Print it flat on its back. No supports.
- Screw the plate to the wall (use a level), or stick it up with tape or strips.
- Slip each buckle over a blade. The belt hangs straight down.
- Slide spare straps in behind the bars underneath.
What you can size in the Layout Tool
- Belts: 1 to 4
- Space between belts: 60 to 90 mm (starts at 73 mm)
- Spare-strap spots: 0 to 4 (the tool tells you the most that fit)
- Mounting: screws (2 or 3 countersunk holes) or tape/strips (flat back)
- The buckle blade is fixed: 35 mm wide, 3 mm thick, leaning back 15 degrees. It's the size I've used for years.
Ready-to-print sizes included
- 2 belts + 2 spare spots: 127 mm wide
- 3 belts + 3 spare spots: 200 mm wide
- 4 belts + 4 spare spots: 234 mm wide
All are 100 mm tall and about 34 mm deep. Four belts is the most that fits a 235 mm bed in one piece.
How to use the Layout Tool (takes a minute)
1. Unzip "2. Layout Tool - GWorks3Dath Belt Hanger.zip" and double-click the .html. Chrome works best.
2. Set your belts, spacing, spare spots and mounting. Check the 3D picture and the green "Ready" message.
3. Press Download STL, open it in your slicer, and don't rotate it.
On a phone? Download the file first, then open it in Chrome. A Drive or email preview can't run it.
In the download
- 1. Start Here - Instructions (PDF, step-by-step)
- 2. Layout Tool (zipped, because Printables doesn't take .html). Unzip it and double-click the .html.
- 3 STLs: 2, 3 and 4 belts
- OpenSCAD source (.scad), for tinkerers
Print settings (AnkerMake M5, 0.4 mm nozzle)
- Material: PLA or PETG, both work. Dry your PETG first.
- PETG: 235 C for the first layer, then 230 C. Bed 75 C, gyroid infill 15-20%.
- PLA: 210 C for the first layer, then 205 C. Bed 60 C, fan 100% after layer 1, gyroid infill 15%.
- Both: 0.2 mm layer height, 4 walls, no supports, no brim needed.
- Needs a bed at least 235 mm wide.
- Each spare-strap bar floats 5 mm above the plate, held by one leg. If a bar sags on your printer, add supports under the bars only.
Mounting: screw holes take a flat-head screw with a head up to 9 mm wide and a shaft up to 4.5 mm. Use wall anchors if you miss a stud, and don't over-tighten.
Safety: made for belts and spare straps. Please don't hang heavy bags, tools, or people on it.
If it doesn't fit, leave a comment and I'll help you dial in your size.
Prints That Just Work™ by GWorks3Dath
Got a household problem that needs a print? Drop it in the comments for the GWorks3Dath Beta Lab, and I might design it next.
For personal use only. Please don't share or resell the files.