Flexi Aquarius Keychain | Zodiac Sign | Print in Place
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wiggly print-in-place Aquarius keychain: a tipped water urn pouring a stream of swinging drops into a splash.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 5
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Standard Digital File License
Aquarius season starts on 20 January, so here's the Water Bearer (♒), one of our twelve Western zodiac flexi keychains and part of the third batch to go live.
It prints in one go: no supports, no assembly, no glue. Five parts, four joints: a tipped urn with the ♒ glyph on its belly and the key-ring loop at its handle, three water drops that fall from its spout on joints, and a splash at the bottom.
Size: 50 x 95 x 6 mm.
Test-printed on our Creality SPARKX i7: that's the print in every photo and video. A ready-made Creality Print project for the i7 is included next to the STL, plus an Anycubic Kobra X project set up the same way (not test-printed on the Kobra X yet).
Print settings:
PLA or PETG, 0.4 mm nozzle, 0.2 mm layers
No supports, no brim
Keep elephant-foot compensation on (about 0.1-0.15 mm) so the joints don't fuse to each other
After printing, flex each joint gently once to free it
Which material: PLA is fine for a keychain that mostly stays indoors. If it lives in your pocket or rides in a hot car, use PETG (PLA starts to soften around 55-60 °C).
The other three signs, Leo, Cancer and Pisces, are already off the printer. Follow Two Paws Workshop so you don't miss them.
Designed by us with AI help (the shapes are written as OpenSCAD code), then printed and tested for real: every photo and video here is the actual print.
Two Paws Workshop: two of us at the bench, making things that move.