Triple Baka Illusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NO AI USED!! What if we forced the triple baka gang into a single being
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a series of illusion prints I made while discovering the different ways of fusing different 2d "images" into a single body. This is possible by using the intersect tool.
As you could imagine, you will need a lot of supports and patients printing this. A small needle nose pliers would help break loose for those harder to reach supports especially around the head area.
I recommend using 0.2 mm layer height with organic supports enabled and taking the extra time in the slicer to check for any missed overhangs.
I printed this using PLA at 0.3 mm layer height with organic supports at default slicer support settings.
If you made this feel free to tag me (@lenpai0) or share the make! I would love to see it.