Zenni Round Lens Adapter for Steam Frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount Zenni #550011 44mm Round lenses to the Steam Frame
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Using TwoPuncakes excellent lens protector as a base, I added a lens frame for Zenni #550011 44mm Round lenses found here. I did my best to align the focal points but I'm not an optician. I mostly “eye-balled” it.
I believe if you want the focal point in the center of the Zenni lenses you need to order them using an IPD of 69mm (nice), but mine were 65mm (each being 2 mm inward of center) and things still look good for me.
Printing in PLA helps hold the lenses but introduces a problem, the model has no grip. The Steam Frame lens housings are tapered and smooth and have no snaps for mounting Rx adapters.
I cut a channel into the base and printed a TPU gasket. It's a little tight but helps grip the Steam Frame. Be careful not to be too forceful when fitting it the 1st time. After some time, it settles into its channel more and stops being a pain to attach to the Steam Frame.
The gasket is finicky to get nestled in the channel. Tolerances are tight.
I included a version without the channel so you can use your own method for adding grip.
I printed mine at 0.16 layer height. 2 walls. Standard supports and I had to un-check “ignore small overhangs” in Orca Slicer so the gasket channel came out nice and neat.