Card Deck Box - Playing Card Case with Slip Lid, Suits Engraved
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slip-lid box for one standard deck of playing cards (63 x 88 mm, up to 21 mm thick), card suits engraved on the front.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A neat slip-lid box for one standard deck of playing cards: the lid slides over a neck with a 0.25 mm fit, the cards stand 11 mm above the neck so they are easy to grab, and a thumb notch in the front helps too. The four card suits are engraved on the front.
Details: inside 66 x 21.5 mm, 92 mm tall with the lid on. Fits 63 x 88 mm poker-size cards up to a 21 mm stack (about 54 cards, or a thinner sleeved deck). The box prints upright, the lid upside down: no supports. The 2-color 3MF prints a black box and a red lid.
Print settings: 0.2 mm layers, 3 walls, 15 % infill, no supports. About 77 g of PLA for box and lid.
Files: STL and 2-color 3MF.
Images are renders of the actual file (the cards are a render prop). Designed with AI-assisted procedural modeling and checked automatically for printability: watertight mesh, overhang analysis and wall thickness.
Full collection on Cults3D: https://cults3d.com/en/users/aliyalinkilic/3d-models
From the same series: 6-Piece Burr Puzzle: https://cults3d.com/en/3d-model/game/6-piece-burr-puzzle-interlocking-wooden-look-brain-teaser