DeWalt Inflator Whine Silencer DCC018 DCC020
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quarter-wave Resonator to greatly reduce the whine that is hear with the high volume inflator.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tired of the high-pitched scream from your DeWalt inflator?
This custom-designed replacement elbow features integrated quarter-wave resonators engineered specifically to target and damp the most grating high-frequency whine produced by the high-volume inflator mechanism—all without restricting airflow or reducing performance.
Key Features & Benefits
Targeted Acoustic Damping: Specifically tuned to attenuate key noise spikes at 2,800 Hz, 8,500 Hz, and 10,100 Hz using quarter-wave resonator physics. Calculated for standard ambient conditions (24°C at sea level).
Zero Airflow Loss: Engineered so internal geometry maintains full volumetric flow rate.
Broad-Spectrum Tuning: Designed with a wide enough Q-factor to effectively cover temperature variations.
Direct Drop-In Fit: Designed to slot directly into place without additional hardware.
Print & Material Recommendations
Material: TPU Flexible material helps with seal, vibration absorption, and durability.
Supports: Required Ensure entrance lips and fixing tabs remain clean during printing. Support not really needed in the tube or to support the resonance chambers.
If you print this, please let me know how it performs for you! If your unit still exhibits noticeable noise, post a spectral analysis of the whine in the comments and I can look into tuning the resonator frequencies further.