Hypno Spiral Motor Visualizer #1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We all stare at our printers hypnotically... why not take it a little more literal.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 49
- Wydruki
- 2
- Wyświetlenia
- 633
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I find myself staring at my printer mindlessly… so decided to have a bit of fun with this contest.
Since this is highly detailed I strongly recommend a 0.25mm nozzle. If you haven't looked at the Revo 6 upgrade yet, DO IT. It makes swapping out nozzles an absolute breeze.
Worth noting, I normally print entirely in PETG, but this does NOT print well in PETG… the fine details makes it impractical, so I ended up using PLA. I also included a filament swap for the upper layers to add contrast, you could just as easily use a sharpie on the top layer if you didn't want to swap colors. Like most of these designs, just glue two 8mm magnets to the back in a stack.