Hexagonal dice tray, stackable – 150 mm across the corners, recess for a felt insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hexagonal dice tray, 150 mm across the corners, stackable, with a recess for a felt insert.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 4
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Hexagonal dice tray, 150 mm across the corners and 25 mm high; several stack into each other. With a recess for a felt or foam insert. No supports.
Please note: the tray has not been printed yet. The stacking foot (3 mm, 0.2 mm play) is calculated, not yet printed; there is no outside dimension to check.
For rolling dice at the table: the dice stay in the tray, and with felt in the bottom it is quiet. Empty trays stack and centre themselves.
150 mm across the corners, 130 mm across the flats, 25 mm high, 1.8 mm wall, rounded inner corners.
Recess for an insert: cut a hexagon 122 mm across the flats (141 mm across the corners, corner radius 3), felt or foam up to 2 mm. The insert is not included.
Stackable: the 3 mm foot sits in the tray below with 0.2 mm play; the stack does not slide.
Dimensions: No foreign dimension; our part has not been printed and tested with dice yet.
Material: PLA is enough, PETG works too. Do not leave it in the sun or a hot car: PLA softens from about 55 °C.
Not a toy. Storage for game components and small parts; keep out of reach of small children.
Print settings
Material: PLA (or PETG). Do not leave it in the sun or a hot car: PLA softens from about 55 °C.
Layer height 0.2 mm, 2 walls, 15 % infill, no supports.
Orientation: On its bottom, as the file is laid out.
Print time approx. 1 h 55 min and about 49 g (complete part).
Safety
Not a toy. Storage for game components and small parts; keep out of reach of small children. Do not store in the sun or a hot car.
FAQ
Which material? PLA is enough, PETG works too. Do not leave it in the sun or a hot car: PLA softens from about 55 °C.
Are there magnets? No. Lids hold by friction, a groove or a snap nose; magnets are deliberately left out.
How it's made
Parametric CAD (build123d, Python), exact solids. The CAD code was written with an AI assistant and checked by us; no AI-generated meshes or images. Renders are made from the CAD in Blender and show placeholder contents without artwork; they are not photos.
License
CC BY-NC 4.0: you may share and adapt it for non-commercial purposes, as long as you credit Magmacode and link the license (https://creativecommons.org/licenses/by-nc/4.0/). Commercial sale of printed parts only by written agreement with Magmacode.
Matching card boxes, deck boxes, card trays and organizers are in the Magmacode profile.