Track spacing gauge – open line and station, Z, N, TT, H0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Track spacing gauge for open line and station in Z, N, TT and H0 model railways.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Gauge for laying parallel tracks at the standard spacing for open line and station. It rests on the rails, two tongues centre it.
Please note: nothing of this design has been printed yet, and it has not been tested on a layout. The dimensions come from the standards and sources named under “Dimensions”; derived values are marked as such. Print the free check gauge (in our “Magmacode” profile) first.
Two tracks side by side need enough spacing so vehicles do not touch, and no more than necessary so it looks real. Lay two gauges across both tracks: the tongues drop between the rails and the tracks sit at the standard spacing.
Open line and station: two gauges per scale (H0 46 and 52 mm).
Resting on the rails: independent of the track bed, tongues G − 0.6 mm wide.
For straight track only; curves need more spacing depending on the radius.
In the set per scale:
Track spacing open line / station: Z 19 / 21 mm; N 25 / 28 mm; TT 34 / 38 mm; H0 46 / 52 mm
Per scale one gauge for the open line and one for stations; the collection plate holds two of each.
Scales: One variant per scale: Z (1:220), N (1:160), TT (1:120) and H0 (1:87). Each variant contains the single parts and a collection plate with all parts of the scale (3 mm apart).
Dimensions: Dimensions taken from NEM 112 (2024 edition). How accurate it turns out depends on your printer, and our part has not been tested on a layout yet. Print the free check gauge (in our “Magmacode” profile) first to see in advance whether clearance and distances suit your setup.
Material: PLA is enough because the layout stays indoors; PETG works too. 0.4 mm nozzle, ideally 0.12 mm layers, no supports.
Not a toy. Model-making accessory for model railway hobbyists aged 14 and up; contains small parts that can be swallowed, keep out of reach of small children.
Variants (all included)
Z (1:220)
N (1:160)
TT (1:120)
H0 (1:87)
Print settings
Material: PLA (or PETG). PLA is enough because the layout stays indoors; PETG works too.
Layer height 0.12 mm, 2 walls, 15 % infill, no supports.
Orientation: Lying flat, tongues up.
Print time approx. 32 min and about 7 g (default variant H0: collection plate with all parts; other variants differ).
Assembly
Fix the first track, lay two gauges across it one gauge length apart, slide the second track under the tongues and fix it.
Safety
Not a toy. Model-making accessory for model railway hobbyists aged 14 and up; contains small parts that can be swallowed, keep out of reach of small children.
FAQ
Does the part carry current or work? No. Nothing in this range carries current; detail parts are dummies.
How it's made
Parametric CAD (build123d, Python), exact solids. The CAD code was written with an AI assistant and checked by us; no AI-generated meshes or images. Renders are made from the CAD in Blender and show the part in simple staged scenes (placeholder track without brand, cutting mat); they are not photos.
License
CC BY-NC 4.0: you may share and adapt it for non-commercial purposes, as long as you credit Magmacode and link the license (https://creativecommons.org/licenses/by-nc/4.0/). Commercial sale of printed parts only by written agreement with Magmacode.
Matching gauges, loads, tunnel portals and scenery parts for model railways are in the Magmacode profile.
