Super Mario Bros Coasters Collection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Collection of multicolor coasters based in the world of Super Mario Bros.
- Ocena
- 5 / 5
- Polubienia
- 86
- Pobrania
- 332
- Wydruki
- 1
- Wyświetlenia
- 2171
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Collection of multicolor coasters based in the world of Super Mario Bros.
It is not a table, but it is an essential accessory to avoid staining any table, especially if it is a printed table, you know, to celebrate the name change from PrusaPrinters to Printables... 😓
Jokes aside…
All coasters are 2mm thick and fit into a 10cm x 10cm square (in case you want to store them in a box).
Printing
With 100% infill and PLA you shouldn't have any problems even with hot drinks.
Of course all models are already oriented as they should be printed and do not require supports.
All coasters have a base part that is 2mm high, you will need to add a color change from 1mm on these pieces to add your second color.
Some coasters have more pieces that must be printed in their respective colors, these pieces should then be glued to the base with any type of glue.
Check the descriptions of each piece, in them you will find the different colors that you could use.