1 / 3
Peli1560 - Lid Molle Grid v2 — zdjęcie 1
1 / 3

Peli1560 - Lid Molle Grid v2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

New iteration of Peli 1560 molle lid grid for small printers

Ocena
0 / 5
Polubienia
9
Pobrania
7
Wydruki
0
Wyświetlenia
103
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Open Community License v1.1

I build a new iteration of my Peli1560 - Lid Molle Grid model that is more modular and can be printed also on standard printers.

The grid is based on molle again but tailored for my specific needs.

  • 50mm velcro for modular organizer (I got this one and used the pouches for two builds)

  • horizontal storage point for 40cm spirit level and drum sticks using velcro strips (Trilacer 30x5cm)

  • vertical storage for talkback mic (sE V7) on the right (cage needs to go into the cutout because of lid depth), also mounted with velcro strips (also Trilacer 30x5cm); I used some 1,8x16mm steel bolts to stiffen the joints

  • vertical storage for some adaptors in shure wireless mic pouch on the left; these are mounted with larger velcro strips (Trilacer 36x5cm)

The filled grid panels can be cut out to have full molle.

For mounting something else onto the panel there is a grid of holes for M3 screws in 40x50mm spacing (horizontal/vertical) on the plate.

Connection of the panels within is done with M3x12mm sink head screws and the cylindrical dual or quad nuts, the whole assembly is screwed into the 1560 with 4x16mm sink head screws (for wood).

Tagi