Santa Hat & Scarf Black Cat Kit Card

A black cat in a Santa hat and scarf, from flat kit cards.

A Christmas version of my Black Cat Kit Card (https://www.printables.com/model/1903886). The black cat card is included, so everything is in this model. The hat and scarf are two red pieces (plus two white brims) that you join together and put over the cat from above. No glue needed; just nippers or scissors. No supports, no brim.

Assembled size: approx. 41 × 20 × 57 mm

The 3mf has 3 plates, one per color (no AMS needed)

Plate 1 red: hat and scarf, 2 pieces (69.6 × 46.6 mm, approx. 3.4 g, 18 min)

Plate 2 white: hat brims, 2 pieces (29.0 × 42.7 mm, approx. 1.3 g, 11 min)

Plate 3 black: black cat, 7 pieces (117 × 78 mm, approx. 10.9 g, 33 min)

Weights and times are for the Bambu Studio standard settings (2 walls, 15 % infill). The same three cards are also included as separate STL files.

Print settings: 0.2 mm layers, PLA. The parts are exactly 9 layers; other layer heights change the fit. No supports, no brim.

Assembly

Step 1: Cut the gates with flush cutters (nippers) or scissors.

Step 2: Assemble the black cat (instructions on the Black Cat Kit Card page).

Step 3: Join the two red pieces first, without the cat: press the red piece with 3 holes onto the 3 square pegs of the other red piece until it stops. A gap is left between the two pieces for the cat.

Step 4: Attach each white brim to the outer face of a red piece: push the short square peg on the brim into the square hole in the pom-pom of the red piece. The brims are mirror images, so match each one to the red piece it lines up with.

Step 5: Put the assembled hat and scarf over the cat from above. The 3 pegs rest on the top of the cat's head, on its back and at the front of its neck.

No hammering needed. The pegs go in with finger pressure.

Notes: contains small parts. Keep away from small children. Free for personal use. No guarantee of strength or dimensions.

How this was made: not an AI-generated mesh. I redesigned and test-printed this kit over and over by hand. An AI-generated image was used as a reference, and AI tools helped with the CAD scripts.

サンタ帽とマフラーを付けた黒猫のキットカード

黒猫のカードも入っているので、このモデルだけで全部そろいます。帽子とマフラーは、赤い板2枚（と白いつば2つ）を組んで、猫に上からかぶせるだけ。接着剤は不要、道具はニッパーかハサミだけです。サポート無し、ブリム無し。

完成サイズ：約 41 × 20 × 57 mm ／ 積層 0.2 mm、PLA。部品はちょうど9層です。他の積層でははめ合いが変わります。

小さな部品があります。小さなお子様の手の届かない所で組み立ててください。個人利用向けの無料データです。強度・寸法の保証はありません。