Scissor-style Forceps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scissor-style Forceps joined by screw pivot. Designed in OpenSCAD for the course DI3D (MEIM, ISEL)
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Scissor-style forceps (tweezers with finger loops), printed as two identical arms joined by a screw pivot. Designed in OpenSCAD for the course Design e Impressão 3D (MEIM, ISEL, Lisbon).
Flat tips that narrow from 10 mm to 2 mm, with a raised tip so the jaws meet even though the arms are stacked. Finger loops sized from my own fingers, tube handles with a 9 mm diameter. Prints without supports, handles are cut flat on the top and bottom faces.
What you need: 1 screw (M4 x 10mm)
Rounded edges use the morph.scad library (morphological operators for OpenSCAD) by Tiago Charters, Copyright (c) 2025 Tiago Charters, licensed under the GNU General Public License v3 or later.