Star Mantel Stocking Clip — 25 mm / 1 in (Free Sample)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Free weight-free stocking clip for ~1" mantels — complete STL; gallery is 3D renders.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 2
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial
⚠ Gallery note: All images are 3D studio renders or labeled lifestyle mockups generated from the STL — not photographs of a physical print. The free STL itself is complete and printable; I have not uploaded a “make” photo yet.
Free single-size Star Mantel Stocking Clip for mantel shelves about 25 mm / 1" thick.
Clips over the shelf (top arm + bottom grip ridge) with a front plate, raised star, and J-hook for the stocking loop — no heavy weights.
This free file is complete for the 25 mm size. Measure shelf thickness ~2 cm back from the front edge.
Print settings:
• Orientation: as exported, lying on its side (strong direction)
• Supports: none
• Layer height: 0.2 mm
• Walls: 4; top/bottom 5
• Infill: 25–40% gyroid
• Material: PETG recommended; PLA only for light stockings away from heat
• Do not scale in slicer. Not for hot surrounds / open fire. Load-test with a light stocking first.
Design: Jason Combe. Free sample under CC BY-NC.
Optional 5-size pack (19 / 25 / 38 / 51 / 70 mm) + two-colour 3MF + source:
View the optional 5-size pack
