1 / 3
Modular stackable wine rack.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple wine rack that can hold as many or as few bottles as necessary.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Needed a simple way to store my wine but struggled to find anything on the market that was compact enough for what I needed. This model can accommodate bottles up to roughly 79mm in diameter, which covers most 750ml bottles, but you can always scale up the model before printing to accommodate larger bottles. I strongly recommend printing with the bottom side of the holder down as I designed the model to not need any supports when in that orientation. I recommend PETG but PLA also works.