1 / 6
Flashforge Creator 5/Pro Nozzle Wipers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wipes nozzle as removed from parking station. One piece design modelled from original, but slightly stronger and higher.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
One piece design, slightly stronger and nearer nozzle to improve wipe, uses Qidi Plus 4 wiper pads which are firmer than Elegoo ones and wipes nozzle better
Print orientation shown in pics, ensure supports are in correct place
0.16 layer height, 3 walls, PC-CF used to improve temp resistance
Cut Qidi Plus 4 wiper pads in half to fit (Only 2 required)
Note:- Wiper 3 is the opposite hand to the others.
