Vibroplex Dust Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lightweight dust cover for protecting your Vibroplex when not in use. Tested on 40's Lightning and Champion.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
A lightweight dust cover for your Vibroplex. There is a slot centered on the screw terminals for wiring. Enough height for a Lightning, also tested on a Champion.
NOTES
Does not support extensions
Aiming for an economical print, depending on filament, I have had some damage pulling it off the bed and taped it over instead of re-printing. See the green one pictured.
I printed at standard settings and used about 85g of material per-box. Use caution when pulling it up as it is very thin. The edges are strong enough to support some weight and other objects on top, I use mine as a hand-rest when tuning my radio.