Replacement Canopy Knob Cord Holder Vogue Carry 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Canopy Knob Cord Holder Vogue Carry 2 cargo bike
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Standard Digital File License
A sturdy, replacement cord holder knob / Canopy Knob for the Vogue Carry 2 cargo bike. Of voor de nederlanders hier, bakfiets!
These knobs are mounted to the outside of the wooden box and are used to secure the elastic loops of the rain canopy (huif). The original hard plastic knobs are prone to cracking or getting lost over time. This model provides a perfect replacement to keep your canopy tightly secured.
While designed specifically for the Vogue Carry 2, this universal design will likely fit many other popular cargo bike brands that use a similar elastic tie-down system (such as Babboe, Troy, and Cangoo).
Recommended Print Settings:
Material: PETG, ASA, or ABS (Avoid PLA, as these parts are exposed to outdoor weather and constant tension). I made the printprofile for PETG, but you can adjust it in bambu.
Strength: 4 wall loops and 20% Gyroid infill.
Orientation & Supports: Print at a 45-degree angle. This orientation aligns the layer lines diagonally against the pulling force of the tight elastic canopy cords, making the part significantly stronger and preventing layer shear.This angled orientation prints successfully with minimal supports. as seen in the photo's
Happy riding and printing! If this model saved your rainy school run, please leave a like or share a make.