GT2560 Rev A+ and Raspberry Pi Control Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made two versions of a control box for my P3Steel. Both are made for Geeetech GT2560 Rev a+ (possible fit others as…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 495
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Made two versions of a control box for my P3Steel.
Both are made for Geeetech GT2560 Rev a+ (possible fit others as well?)
Rev 2 is made for Raspberr Pi Zero, also with space for an DC-DC converter.
Attached is also a cover with cutouts for 2 x 40mm fans
Rev 3 is made for Raspberr Pi 2/3/3B.
Attached is also a cover with cutouts for 1 x 92mm fan
Both are made with knurled inserts as a thought.
These will be melted in place with an soldering iron.
But nuts and long bolts would work as well.
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Steel
Rafts:
No
Supports:
No
Resolution:
0.4
Infill:
15%
Filament: Generic PLA Any Any
Notes:
As this is a quite large print (almost all my print surface), a brim is recommended.
Print first layer at slow speed to achieve a nice first layer.
Category: 3D Printer Parts