Slat Wall Picture Hook (parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A nail-free picture hook for acoustic wood-slat walls: wooden slats on felt with vertical gaps between them. Press it st
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
How it works
Tapered, barbed tongue. The part that goes into the gap gets wider toward the front, so you push it in until it binds. Small backward-facing teeth let it slide in but bite the wood if anything pulls it out.
Tall back plate. The hook sits at the bottom and the tongue at the top, with a plate in between that rests on the slat faces. Pulling down on the hook presses the plate's bottom against the wall, so the hook can't lever itself out of the gap.
One hook fits a range of gaps. It grips any gap within ± the "gap variation" setting, so small differences between slats don't matter.
Settings
Measure your wall and enter:
Setting | What to measure |
|---|---|
Gap width | Distance between two slats. Calipers give the best result. |
Slat depth | How deep the gap is, from the slat front to the felt. |
Gap variation | How much your gaps differ. The default ±1.75 mm suits most walls. |
Optional: overall height (taller holds better), hook size, and how hard the barbs bite.
Printing
Print standing upright, exactly as generated. It needs no supports.
4 walls, 0.2 mm layers, and a small brim, because it's tall on a small footprint.
PLA works for small, light frames in normal room temperature. Use PETG for heavier frames or warm spots, because PLA slowly gives way under a constant load.
Installing
Line the hook up with a gap and press firmly straight in until it stops. A light tap with your palm is fine. To remove it, wiggle it side to side while pulling.
Tested holding small frames (under A4) on a 12.15 mm gap, 14 mm deep slat wall.