U-spring surgical tweezers with snap lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
One-piece surgical tweezers with a U-shaped flexure spring and a snap lock. Prints flat, no supports, no assembly.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 13
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Share Alike
One-piece surgical tweezers designed in OpenSCAD for the 3D Design and Printing course (DI3D) at ISEL, Lisbon.
The two arms are joined by a U-shaped curve that works as a flexure: squeeze the arms and the tips close, let go and the curve opens them again. The tips are thin, with interlocking serrations all the way to the end. They are slightly angled, so the very tip touches first and the rest of the serration closes as you squeeze harder, instead of the tip opening. Halfway along the arms there is a snap lock, a fork on one arm and an arrow on the other. It only locks once the whole serration is pressed together, so the tips keep gripping. To release it, push the lower prong of the fork aside with a fingernail.
Print settings: PLA, 0.2 mm layer height, 20% infill, 200 °C nozzle, 60 °C bed, printed flat with no supports. The model is about 190 x 52 x 9 mm. About 1 h 26 min and 5.13 m of filament on a Creality Ender-3 V3 KE (sliced in Cura). The OpenSCAD source file is included.
