1 / 2
Prusa MK4(s) MMU3 PTFE Straightener - toolless — zdjęcie 1
1 / 2

Prusa MK4(s) MMU3 PTFE Straightener - toolless

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Toolless straightening of the peTFE tube at the entry to the Nextruder.

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
34
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The PTFE tube is usually not coming straight into the fitting at the entry to the Nextruder, which sometimes prevents loading of the filament. This is toolless solution of the problem.

Assembly:

  1. Unscrew the fitting from Nextruder and disconnect the PTFE tube

  2. Slide on the top part of the straightener

  3. Connect the fitting to the PTFE tube

  4. Slot fitting in the bottom part of the straightener

  5. Screw in the fitting back to the Nextruder, by rotating of the bottom part of straightener

  6. Slide down the upper part and screw it in the bottom part

Alternatively, you can remove the the tube also on the MMU3 side. Than you can first screw the two straightener parts together, connect to the Nextruder and MMU3 last. The tolerance between the upper part and PTFE tube is quite tight.

I have printed the bottom part with brim. PLA for now, we will see how long it last...

Tagi