Vail Summit Keyboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keyboard for the CardKB used on the Vail Summit
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 4
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a keyboard for the Vail Summit CW trainer based off of the Modular CardKB keyboard case by Prashant Sinha.
Two keyboard options are included, one with flush letters for MMS/AMS and one with raised letters for a layer color change. The KB base works for either.
The keyboard needs to have some flexibility so PETg or TPU are recommended. PLA is too stiff and will most likely break. For added strength, Ironing All Top Surfaces is highly recommended up to at least the top of the spring portion (roughly 2.5mm). Refer to the original model for more information. Also, the smallest possible nozzle will produce the best quality letters.
Recommended print settings:
KB Base
PETg or PLA
0.4mm nozzle
0.2mm layer height
Keyboard (flush or raised)
PETg or TPU
0.25mm nozzle
0.15mm layer height
Ironing-->All Top Surfaces to at least 2.5mm (use height range modifier)