Mini Bag Clip — Short Handles and Serrated Jaws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Single-piece bag-sealing clip, developed as an academic 3D-printing project
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 4
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
A single-piece bag-sealing clip, developed as an academic 3D-printing project.
This model is an adaptation of the “Chip Bag Clip” by Stephen Wilson - srwilson58, available at https://www.thingiverse.com/thing:1212828, under a CC BY-NC 4.0 (Creative Commons - Attribution - Non-Commercial) license.
Modifications include replacing the original serrated pattern with flat jaws with small serrations on the gripping surfaces, shortening the actuation arms by 5 mm along the longitudinal axis, and positioning them slightly closer together.
Prints were tested using PLA with both two and three perimeters. The three-perimeter version felt stiffer during handling. The durability of the flexible mechanism has not yet been quantified through cycle-count testing.
Print settings
Material: PLA
Walls / Perimeters: 3
Layer height: 0.2 mm
Infill: 20% Cubic
Supports: No
Print orientation: Flat on the build plate
Printing time: Approximately 25 minutes