1 / 1
Support for neodym magnet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support for 8x1mm neodym magnet
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Public Domain
The magnet tape is a bad idea, it does not work at all. Forget it.
Instead i have made this piece to glue 8x1mm neodym. I have used this magnet model, which are suprisingly strong for the size (the pieces remain in place of you put them upside down !)
Simply glue the magnets in the holes, then glue the supports to the frames. And you're done.
At the end I had to also glue the 4 board sheets to the frames, because it was sliding around.
The very good advantage is that your pieces will always be perfectly centered !