Angle Brackets 20–60 mm – Gusseted Corner Brackets with Countersunk Holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Strong 90° angle brackets in five sizes (20–60 mm) with corner gusset and countersunk screw holes.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 36
- Wydruki
- 1
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Standard Digital File License
Sturdy 3D-printable angle brackets for shelves, boxes, frames, furniture repairs and all kinds of workshop builds.
Every bracket has a reinforcing corner gusset to stop the legs from flexing, and countersunk holes so the screw heads sit flush.
Design by Quattro Design – if you like it, support me at https://buymeacoffee.com/quattrodesign
Sizes included
Size | Leg length | Width | Thickness | Holes | Screws |
|---|---|---|---|---|---|
20x20 | 20 mm | 15 mm | 4 mm | 2 | 3–3.5 mm |
30x30 | 30 mm | 20 mm | 5 mm | 2 | 4 mm |
40x40 | 40 mm | 30 mm | 7 mm | 4 | 4–4.5 mm |
50x50 | 50 mm | 40 mm | 8 mm | 4 | 5 mm |
60x60 | 60 mm | 50 mm | 9 mm | 4 | 5 mm |
Why I made it
I kept needing small brackets for quick fixes and projects, and store-bought ones never came in the right size. So I made a full set that prints fast and holds well.
Print settings (recommended)
Material: PETG or PLA+ (PETG for anything carrying load or exposed to heat)
Layer height: 0.2 mm
Walls: 4
Infill: 30–40 % (gyroid or cubic)
Supports: see README for orientation and support notes
Made and tested on Anycubic Kobra 3 / Kobra X – works on other printers too (Bambu, Creality, Prusa etc.)
Included files
3MF and STL for every size, product images, README (EN/NO), copyright and license.
License
Personal use only. For commercial use or other licenses, e-mail [email protected].