1 / 6
JIKA Toilet Flush button mechanism Repair Kit – Adjustable Threaded Rod & Insert (M6) — zdjęcie 1
1 / 6

JIKA Toilet Flush button mechanism Repair Kit – Adjustable Threaded Rod & Insert (M6)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple 3D-printable replacement for a broken or missing adjustable rod in JIKA DualFlush toilet button mechanism

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
7
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial

A simple 3D-printable replacement for a broken or missing adjustable rod in a dual-flush toilet button mechanism.

I originally broke the mechanism under one of the flush buttons - instead of replacing the entire flush mechanism, I designed a two-part replacement consisting of:

  • Threaded rod with a smooth actuator tip and a built-in stop

  • Threaded insert with a small anti-rotation tab

Both parts use matching M6 × 1 threads, allowing the rod length to be adjusted by screwing it into the insert.

Dimensions

Threaded rod
  • Overall length: 46.81 mm

  • Thread: M6 × 1

  • Threaded section: 22.5 mm

  • Stop: Ø 7 mm, approximately 5 mm long

  • Smooth actuator section: Ø 4.68 mm

Insert
  • Outside diameter: 8.2 mm

  • Length: 22 mm

  • Internal thread: M6 × 1

  • Anti-rotation tab: 1.4 mm wide, extending 1 mm beyond the cylindrical body

Print settings

  • Material: PLA (successfully tested)

  • Printer: Original Prusa MINI+

  • Layer height: 0.15 mm

  • Print orientation: Vertical

  • Supports: None

  • Brim: 2mm

Assembly

  1. Screw the threaded rod into the insert.

  2. Adjust the rod to the required length.

  3. Place the insert into the existing opening in the flush mechanism.

  4. Align the anti-rotation tab with the slot.

  5. Reinstall the flush button and test its operation.

Testing and compatibility

The original design was successfully printed in PLA and restored a working toilet flush mechanism.

The first print had tight threads and minor elephant-foot deformation, requiring light filing and assembly with use of more force. The revised geometry is intended to improve fit, but has not yet been independently print-tested.

I have also included editable CAD geometry so you can adapt the dimensions to your own mechanism.

Tagi