1 / 5
CoralFlip — Flip-Up Service Dock for Coralboard SL — zdjęcie 1
1 / 5

CoralFlip — Flip-Up Service Dock for Coralboard SL

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A vented Coralboard SL case with a flip-up carrier for underside access. CAD prototype.

Ocena
0 / 5
Polubienia
3
Pobrania
1
Wydruki
0
Wyświetlenia
42
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
 A case that opens up for service

CoralFlip combines a removable vented cover with a flip-up board carrier for the Synaptics Coralboard SL. The idea is simple: cover the board during normal bench use, then remove the hood and tilt the carrier to reach the underside without first removing the board from its carrier.

The open-frame carrier, side locking arrangement and printed hand knobs are intended to make inspection and maintenance easier than repeatedly dismantling a conventional enclosure.

**Prototype status:** This release is based on the official board CAD reference. The gallery shows Autodesk Fusion CAD renders, not photographs of a printed build. Physical printing, hardware fit, cable clearance, repeated operation and thermal performance have not yet been verified. The hardware schedule and final assembly instructions still require confirmation before this can be described as a validated build.

### Design features

- Lift-off hood with ventilation slots.
- Flip-up carrier with an open underside for inspection and access.
- Indexed service position with a side locking arrangement.
- Broad front opening around the board connectors; real cable-plug clearance still needs checking.
- Separate base, carrier, hood and reusable printed hand knobs.
- Four unique printed part designs, making six printed pieces in total.

Ventilation openings are design features, not evidence of a tested cooling performance or a temperature rating. This is an open electronics enclosure, not a dustproof or waterproof case.

### Printed parts

| Part | Quantity | Intended print orientation |
|---|---:|---|
| Dock base | 1 | Flat base on the build plate |
| Flip carrier | 1 | Flat underside on the plate, standoffs upwards |
| Vented lift-off hood | 1 | Exterior roof surface on the plate, walls upwards |
| Thumb knob | 3 | Flat bottom on the plate, hexagonal recess upwards |

The board shown in the renders is an electronics reference, not a printable component. It is not included in the printable part package.

### Proposed printing setup

The optional editing project is prepared for a Bambu Lab H2S with a standard-flow 0.4 mm nozzle, Bambu ABS and a Textured PEI Plate.

| Setting | Prepared value |
|---|---|
| Layer height | 0.20 mm |
| Wall loops | 4 |
| Top / bottom layers | 5 / 5 |
| Infill | 25% Gyroid |
| Brim | 8 mm, outer only |
| Base supports | Local manual support regions beneath the service-stop overhangs |
| Other parts | No supports enabled in the current draft profile |

These are proposed prototype settings, not print-tested recommendations. Inspect the generated support and bridge toolpaths before printing. The editing project contains the part arrangement and settings; it is not a verified ready-to-send G-code package. Reslice for your exact printer, nozzle, plate and filament.

The profile is currently a single-material layout. The different colors in the renders are illustrative; the separate components can be printed in your chosen colors as separate jobs.

### Hardware and assembly status

The CAD uses nominal M3 fasteners, printed hex-nut pockets and printed hand knobs. Printed hole and nut-pocket fit must be checked with the actual filament and hardware.

**The exact screw lengths, head styles, quantities and nut/washer schedule have not yet been finalized.** Verify the hardware for the board mounting points, both pivots, the service-position lock and the two cover fasteners before attempting a complete assembly. Do not treat the renders as a complete hardware installation diagram.

The intended assembly sequence is to secure the board to its carrier, attach the carrier between the base cheeks, fit the locking hardware, and then fit the removable hood. A verified step-by-step guide should be added after the first physical build.

### Before moving the carrier

1. Switch off the board and disconnect power.
2. Unplug any cables that could restrain the carrier.
3. Remove the hood and release the position lock as appropriate.
4. Move the carrier gently and secure it in the intended position before handling the board.

Check for mechanical interference, trapped cables and conductive hardware contacting the electronics. Avoid overtightening printed parts. This is a prototype, not a certified protective or safety enclosure.

### Reference and credits

The electronics geometry shown in the renders is the official Coralboard SL reference model provided by the Coral / Synaptics team. The printable enclosure and service-dock parts are the CoralFlip design.

- Official board reference: https://www.printables.com/model/1859306
- Coralboard documentation: https://developer.synaptics.com/docs/developer-kits/coralboard/

The board reference is not redistributed in the printable parts package. Any future redistribution of third-party reference geometry must follow the license on its source page.

Tagi