1 / 2
Baby Monitor Kickstand – HelloBaby HB6339 (snap-in replacement) — zdjęcie 1
1 / 2

Baby Monitor Kickstand – HelloBaby HB6339 (snap-in replacement)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Snap-in replacement kickstand for the HelloBaby HB6339 baby monitor parent unit. No tools or glue.

Ocena
0 / 5
Polubienia
1
Pobrania
0
Wydruki
0
Wyświetlenia
9
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Our original kickstand broke and I couldn't find a replacement anywhere, so we made one.

Fit: HelloBaby HB6339 parent unit (the stand is 22 x 56 mm, 3 mm thick, with 3 mm pivot pins). Should also fit other monitors with a similar stand - the OpenSCAD file is included and every size is a parameter at the top.

How it works: like the original, two slits at the hinge end let the side arms flex. Squeeze the two outer arms together, line the pins up with the holes, and let go. (Our first version had no slits and the pins wouldn't go in.)

Print settings (tested):

  • PETG (PLA should work too), 0.2 mm layers

  • Print flat as oriented, no supports, no brim

  • 6 walls, 40% infill (about 12 min, 4 g)

Customise: open monitor_stand.scad in OpenSCAD and change w, h, t, pin_d, pin_len, pin_y, slit_len, arm_w.

Designed with OpenSCAD. Remix welcome - please share your version back.

Tagi