1 / 3
tesa Powerstrips Duschregal - Seifenablage — zdjęcie 1
1 / 3

tesa Powerstrips Duschregal - Seifenablage

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Passgenaue seitliche Seifenablage für tesa Powerstrips Duschregale.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
2
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Praktische Seifenablage für tesa Powerstrips® Duschregale

Schluss mit matschiger Seife! Wer feste Duschseife nutzt, kennt das Problem: Liegt sie dauerhaft in der Standard-Ablage, sammelt sich das Wasser und die Seife trocknet nicht richtig ab.

Diese maßgeschneiderte, seitliche Seifenablage löst das Problem. Sie lässt sich einfach an das bestehende tesa Powerstrips Duschregal anstecken. Durch das Design kann das Wasser perfekt abfließen, sodass deine Seife nach der Benutzung schnell trocknet und deutlich länger hält.

Features:

  • Perfekte Passform: Speziell für die seitliche Montage am tesa Powerstrips Duschregal entwickelt.

  • Optimale Trocknung: Wasser läuft direkt ab – für eine langlebige, feste Seife.

  • Einfache Montage: Wird einfach eingehängt (kein Bohren, kein Kleben am Modell selbst nötig).

Druckhinweise (Print Settings):

  • Ausrichtung: Auf dem Kopf drucken (upside down).

  • Support: Kein Support notwendig. Ich habe die Ablage bewusst flach designt, damit sie ohne Stützstruktur gedruckt werden kann (spart Zeit und Material).

  • Düse (Nozzle): 0,4 mm

  • Schichthöhe (Layer Height): 0,2 mm

  • Material: Transparentes PLA+ (funktioniert durch die verbesserte Stabilität von PLA+ super und sieht schick aus) oder alternativ PETG / ASA wegen der Feuchtigkeit.

###########################################################################

Practical Soap Dish for tesa Powerstrips® Shower Caddies

No more soggy soap! Anyone who uses solid shower soap knows the problem: if it sits in the standard tray, water accumulates and the soap doesn't dry properly.

This custom-made, side-mounted soap dish solves the problem. It easily clips onto the existing tesa Powerstrips shower caddy. The design allows water to drain perfectly, so your soap dries quickly after use and lasts significantly longer.

Features:

  • Perfect Fit: Specifically designed for side mounting on the tesa Powerstrips shower caddy.

  • Optimal Drying: Water drains directly – keeping your solid soap durable.

  • Easy Installation: Just clips on (no drilling or gluing needed for the model itself).

Print Settings:

  • Orientation: Print upside down.

  • Support: No supports needed. I deliberately designed the dish flat so it can be printed entirely without support structures (saves time and material).

  • Nozzle: 0.4 mm

  • Layer Height: 0.2 mm

  • Material: Transparent PLA+ (works great due to the improved stability of PLA+ and looks very sleek) or alternatively PETG / ASA due to the humidity.

Tagi